Atmos Kiln Kit Vaporizer
5 Year Warranty
Last updated on January 21st, 2020 at 11:02 pm
Dominion experience propels Atmos to the top for the assertive quality displayed by the styling of the Kiln Kit. Listed with aesthetic bravado, the unit produces with shameless clarity that broadly manages accommodating vape community members and enthusiasts of every level throughout their vaping action.
Performance of the Atmos Kiln Kit Vaporizer
The Atmos Kiln Kit does qualify as a RA model in accordance with its easy access chamber replacement. The unit’s portability ratio is a high designation, which adds in a kiss of the influential advantages associated with the look it helps pull forward for its owner.
Converting between a vaping method using wax and/or oil concentrates, the unit is powered by a 950mAh battery and it is completely re-chargeable. Being equipped with a ceramic heat chamber and ceramic wrapped coils. That heat delivery system enables its uncanny ability to preserves every ounce of the taste and all of its clean sharp edges. The consistent heat also helps the device produce some major condensation density, released in the exhale.
Customers are able to choose from the black or white colors are the current ones available. The unit is easy to disassemble and clean then rebuild. As a standard rule the whole kit comes equipped with overcharge, and surge protection. Vapers are at liberty to vape freely, or they can ramp-up every aspect for faster, heartier remittance by increasing the resistance to the higher voltage dynamic versions.
There is minimal residue left behind and the rate of consumption is jaw dropping preservation.
Aesthetically there is the smaller stature and weight of the Atmos Kiln Kit wax vape pen, but there are a few more features of the inner design to consider like dual draft vents for airflow, a temp range of 300°F to 400°F. These models offer the choice of using alternate power output rather than the manufacturer’s recommendation. One of the best parts is that it is a 510 thread connection so the battery threads are universal.
Be mindful, that by choosing to use an alternate battery level, you could cause improper heating technique. That could alter the flavor and vapor density that you normally get from your product.
In Atmos fashion, the Kiln Kit, raises the standard for flavor, taste, and selection delivery. Only the event of a human error will cause this device not to deliver the full bounty of its potential. The manufacturing design added-in dual vents holes into the unit which allows a free air-flow intake. There is much less of a chance of your unit clogging or pulling with a hard drag on the intake with this feature. The taste quality remains crisp because the air-flow is free and there is the influx of fresh cool air across the heat source, which keeps the unit from overheating and burning your product completely or scorching the taste.
The delivery you get will be a straight draw pull with voluminous cloud density, that usually presents itself very assertively bold. This type of taste, delivery, and the sensation that goes along with it will be closely reminiscent to the effects gained from the water-pipes of yester-year.
- Ceramic oven
- Wax and oil concentrate vaping
- 510 thread
- Dual air vents
- Masculine identity
- 2 color options
- Oil and wax
- Replaceable bowl
- Double insulated
- 5-year warranty
- 950 mAh Lithium Ion battery
- Fast charge
- Sub ohm
- Temperature variation from 300°F to 400°F
- Output of 10 to 15 watts
- Ceramic bowl
- Stainless steel plate
- Ceramic heating rod
- One temperature consistency
Battery and Temperature Settings:
This unit varies from a 10 to 15 watts, by the simple delivery of changing the coil rather than temperature surfing. 950 mAh Lithium Ion re-chargeable battery. This unit is power saving version that conjoins the powering action into the heating source.
The Atmos Kiln comes equipped with a 950mAh Dual-IC Protected Lithium-ion Battery. However, since there is no temperature control, there is no way that you can control how hot it gets when you are using it. This typically won’t be an issue, however, as the waxes will melt just fine with the wattage provided and will remain perfectly vaporized due to the ceramic disk design. If you are aiming for more control, you can always replace the battery with another one that is 510 thread compatible!
Using dual air vents, the Atmos Kiln is designed to ensure excellent air flow when taking pulls from your dab pen. Due to the power, you will not need to take pulls of more than a few seconds to get large, flavorful vapor clouds. The only thing that you need to take into consideration when it comes to air flow is the amount of wax in your chamber and the length of your pulls. If you put too much wax into your chamber at once, it will clog your device. Also, if you take pulls that are too long, it is known to cause some draw resistance due to the overheating of the wax.
The Atmos Kiln, like most excellent dab pens, instantly heats the ceramic dish within seconds to allow you to take pulls from your device instantly. In addition to the rapid heating, the design of the ceramic dish keeps your wax heating slowly and evenly, ensuring that your concentrates do not burn while you are using the device. If you do not like the heating component that comes with the device, the best part is that you can always change the battery out to modify your device and experience an entirely new wax vaping session!
Clean Vapor Quality
The Atmos Kiln was designed to make your vapor quality the best that it can possibly be. The ceramic dish component in the device keeps your wax concentrates from being tainted from any mental or internal pieces of the device. In addition, the dual vent holes that are featured on the device allow for cool air to constantly enter the device as you are taking pulls, keeping your wax from overheating or getting burned. These two features allow your wax concentrates to vaporize as intended and maintain their flavor.
How to Use the Atmos Kiln Kit:
1). Charge fully.
2). Access the load chamber by removing the mouthpiece portion of your device.
3). Insert product.
4). Replace cap.
5). Press ignition button, vape at your convenience with the added pleasure at your fingertips.
When you first purchase your Atmos Kiln, you need to make sure that you charge your device fully before you begin using it. Once it has been fully charged, remove the mouthpiece from the top of your device to access the loading chamber inside of the device. Using the loading tool that came with your purchase, carefully scoop your wax into the chamber. (Remember, this device is not made to handle large amounts of wax at a time.) When you’ve finished loading your wax, replace the mouthpiece and press the power button. Your device is now loaded and ready to go!
When it comes to dab pens, the Atmos Kiln is an easy-to-use and high-quality option that is perfect for wax enthusiasts of any experience level. If you have been thinking about getting a new dab pen, we highly recommend that you take a look at the Atmos Kiln as your next option!
Atmos Kiln Kit Features:
- Compact and Durable
- 510 Thread Connection
- 950mAh Lithium-ion Battery
- 5 Year Warranty
- No Wicks
- No Exposed Coils
- Ceramic Disc Atomizer
Atmos Kiln Kit Vaporizer Includes:
– 1 x Atmos Kiln Kit
– 1 x Kiln Wax Attachment
– 1 x 950mAh Lithium-ion Battery
– 1 x Micro USB Charger
– 1 x Dab Tool
– 1 x User Manual